
1
AVer Video Conferencing Network Setup Guide
Note: Please pass this page to your Network Admin/IT Dept.
Please refer to the users manual to set up Admin Password/System Name and Phonebook
Scenario 1: Public IP Conguration (Outside of Firewall)
From the remote press “Home” -> “Setting” -> “System Settings” -> “Network”
(Example: If you plan to reserve 512k and not exceed 1Mbps for video conferencing then leave above settings
as default. For a specic entry in the phonebook with which you wish to implement HD, you can set call
quality to 1Mbps in the phonebook or while dialing.)
1. From the remote press “Home” -> “Setting” -> “System Settings” -> “LAN Conguration”.
2. In the “Obtain IP address” line, choose “Static IP”.
3. Manually input the “Public IP address”, “Subnet Mask” and “Default Gateway”.
4. Select “Apply” and press
5. Press “Home” on the remote to return to the home menu.
6. Press the “Call” button on the remote and you are ready to make your rst call.
Bandwidth Requirements
H.323 Related Port Usage for Firewall Setup
Four Possible Setup Scenarios for Video Conferencing
Dialing Methods
formerly
AVerMedia In formation
Resolution Quality / Bandwidth MCU w/ 3 site*
4SIF (704x480) / 4CIF (704x576) 256kbps/384kbps 768kbps/1152kbps
720p @ 30 frames per second (1280x720) 1Mbps n/a
Port Function Type
1719 Gatekeeper UDP (Bi-Directional)
1720 H.323 Call setup TCP (Bi-Directional)
30000-30039 Signaling and control for audio, call, video, and data/FECC TCP and UDP
80 HTTP Interface (Web Tool)
5060 SIP port TCP and UDP
IP Address Dialing
1. Press the “Call” button on the remote to open the call options
2. Input the IP address of the location you are planning to call
3. Choose the call quality you want to connect with
4. Press the Call button on the screen to initiate the video conference call
Comentarios a estos manuales